CRT 10 - TECHNICAL CHARACTERISTICS
INTERSTIK CRT 10 is a contact adhesive made based on special polymers.
INTERSTIK CRT 10 is used for bonding ultra passes to chipboard, as well as for bonding synthetic materials, rubber, cork, hard PVC, and felt.
|
Appearance |
transparent solution of yellow color |
| Dynamic viscosity ( ISO 3219,20℃), mPas |
410 – 510 |
|
Specific gravity (ISO 2811, 20℃), g/cm3 |
1.09 |
|
Total solids (ISO 3251), % |
min. 19 |
|
Flash point (ISO 3679),℃ |
< 0 |
|
Application |
spraying |
|
Consumption, g/m2 |
200 – 400 |
|
Package |
plastic canister: 16kg |
|
Storage conditions |
in original packaging, in a dark place, at temperature from 5℃ to 25℃. |
|
Storage life |
2 years |
The adhesive is applied on both surfaces to be bonded. One layer is applied. Draying time is 5 to 10 minutes. The adhesive is prepared for use by adding 5% of HARDENER HTF to INTERSTIK CRT 10 and mixing well. Thus prepared adhesive it must be use whit in 4 hours. The temperature during application should be between 20℃ and 30℃. The bonded joint can withstand temperatures up to 110℃.