INTERPREN RED 1 - TECHNICAL CHARACTERISTICS

INTERPREN RED 1 is a contact adhesive made based on special polymers and resins.

INTERPREN RED 1 is used in the furniture industry for bonding foam, fabric, leather, and other materials to wood, chipboard, and similar materials, as well as for bonding foam-foam joints.

Appearance

homogeneous solution of red color 

Dynamic viscosity ( ISO 3219,20℃), mPas

470 – 570

Specific gravity  (ISO 2811, 20℃), g/cm3

1.21

Total solids (ISO 3251), %

min. 39

Flash point (ISO 3679),℃

non-flammable

Application

spraying

Consumption, g/m2

200 – 300

Package

plastic canister: 6kg, 25kg

Storage conditions

in original packaging, in a dark place, at temperature from 5℃ to 25℃.

Storage life

1 years

Before use, mix the adhesive. The surfaces to which the adhesive is applied should be clean and dry. The adhesive is applied evenly by spraying on one or both surfaces to be bonded. If bonding foam to foam, the adhesive is applied to both sides, and bonding is done immediately after application. If bonding foam to another material, the adhesive is not applied to the foam, and bonding is also done immediately after application. The bonded joint can withstand temperatures from 70°C to 80°C.