TECHNICAL DATA
CR 1000 is contact adhesive based on special polymers.
CR 1000 is used to repair and maintain rubber boats.
|
Appearance |
transparent yellow solution |
| Viscosity(ISO 2431, ⌀8, 20℃), s |
55 ± 5 |
|
Specific gravity(ISO 2811, 20℃), g/cm3 |
1.38 |
|
Total solids (ISO 3251), % |
min. 16.5 |
|
Flash point(ISO 3679),℃ |
non-flammable |
|
Application |
by brush |
|
Consumption, g/m2 |
ranging from 300 – 500 |
|
Packaging |
tin cans: 1 kg, 6 kg |
|
Storage conditions |
in original packaging in a dark place, at temperature from 5℃ to 25℃. |
|
Storage life |
4 years |
Surfaces to which the adhesive is applied must be prepared in advance. Rubber is sanded only to the extent that it is matte and not shiny. Sanded rubber is cleaned and degreased with a cleaning agent INTERSOL NF. The adhesive is prepared just before bonding by adding another component HARDENER HTF (50g) in the amount of 5% in relation to the adhesive and mixed well. Thus prepared adhesive is usable for 4h. We recommend applying the adhesive in two coats. The drying time for the first coat is 30 minutes and 10 to 20 minutes for the second, at a temperature of 20℃ to 30℃. The surfaces to be bonded are pressed with rollers to make contact between them.