CR 3000 is a contact adhesive basis on special polymers.

The adhesive CR 3000 is used for bonding leather or some other porous material in the automotive or footwear industry. We recommend it for bonding leather to the steering wheel and car gear shift lever.


yellow homogeneous solution

Viscosity (ISO 2431, ⌀8, 20℃), s

55 ± 5

Specific gravity  (ISO 2811, 20℃), g/cm3


Total solids (ISO 3251), %

min. 22

Flash point (ISO 3679),℃

< 0


by brush

Consumption, g/m2

200 – 300


tin cans: 700 g,  4 kg

Storage conditions

in original packaging, in a dark place, at temperature from 5℃ to 25℃.

Storage life

1 year

Adhesive CR 3000 is suitable for application by brush on one or both surfaces to be bonded. The adhesive has good initial strength and a long open time. Good initial strength allows bonding materials a short time after application, and long open time allows correction of bonded materials without additional application of adhesive. For joints exposed to high temperatures, we recommend the addition of 5% of HARDENER HT (40g). Thus prepared adhesive is usable for 4 to 6 hours.